Arihant Dyechem Mumbai, Maharashtra

Leather Chemical

ARIFAT S-20 Leather Softener Chemical

ARIFAT S-20 Leather Softener Chemical

ARIFAT S-20 is combination of natural phospholipids with synthetic softners.
Characteristics
Appearance:Yellowish brown liquid
Fastness to Light:Good below 30oC
Colour:Yellowish buff
pH OF 10% SOLUTION:7.5 to 8

Stability
Atleast 6 months if stored below 300oC at higher temperature it decomposes

Ionic Nature
Anionic

Compatibility
Compatible with vegetable and synthetic tanning agents as well as with anionic dyestuff.

Emulsifying Capacity
Upto 20% of it own weight for mineral oil and upto 40% For natural oil.

Application : FOR NATURAL OILS
ARIFAT S-20 is pre-emulsified with water at 50oC and then freely diluted.

Additional Information:

ARIFAT S-60 Synthetic Fatliquors

ARIFAT S-60 Synthetic Fatliquors

ARIFAT S-60 is a fully synthetic fatliquor which renders a soft feel to the leather without effecting Dyeing and finishing in anyway . It also penetrates into leather without use of other oils . It is also stable to Dyes, Ionic salts, Chrome salts etc.
Characteristics
Colour:Light brown slightly viscous liquid
Active Matter:60%
Ionic Nature:Anionic
Ph Value Of 10% Solution:Approximately 7

Stability
Stable to


Compatibility
Compatible at usual concentration with above.

Emulsifying Capacity
More than 100% of its own weight of Natural oils and mineral oils.

Application
ARIFAT S-60 easily dissolves in warm water and can be therefore added to the float directly . The float temperature should be 50oC approximately.

Additional Information:

ARIOL 234 Chemical Leather Skin

ARIOL 234 Chemical Leather Skin

SOAKING PRODUCTS
CHEMICAL COMPOSITION
Characteristics
Appearance:
Appearance: of Green Color
Active substance:around 30%
pH in 10% sol:5.5-6
Ionic charge:non ionic
compatibility:anionic and nonionic
biodegradability:sup. To 90%

Properties
The high absorbing power of ARIOL 234 greatly increases the Penetration of the water into the fibers that happens quickly and Uniformly, guaranteeing also the elimination of the sebaceous Substances.

ARIOL 234 is used in the soaking of dry, salted or green salted Skins.

ARIOL 234, used in the liming, avoids and excessive swelling of the Derma, easing the penetration of the lime and the sodium sulphide.

Its use during this working state, allows to obtain a skin with a finer Grain and a limited formation of wrinkles, improving greatly the yield.

ARIOL 234 is used with excellent results as degreasing agent to eliminate grease and as dispersing agent during dyeing.

Use
You can use from 0,3% to 1% of ARIOL 234 according to the Field of application.

Additional Information:

ARIOL 342 Leather Chemical

ARIOL 342 Leather Chemical

CHEMICAL COMPOSITION
Characteristics
Appearance:yellow liquid at medium high Viscosity.
Active substance:around 20%
pH in 10% sol:6.5-7
Ionic charge:anionic and nonionic
compatibility:anionic and nonionic
biodegradability:sup. To 90%

Properties
ARIOL 342 is a sulfonate surfactant with absorbing and degreasing Power.

Using ARIOL 342 to accelerate soaking which reduce the tension Between the water and the skin fibres, emulsifying at the same time Greases and oils present.

ARIOL 342 used in liming, improves the penetration and the Distribution of the products commonly used for such working. Its high cleaning power eases the removal in the rinse of all Impurities present in the untreated skin.

Use

Additional Information:

Amarlix ABW Liquid Anionic Fatliquor For Leather

Amarlix ABW Liquid Anionic Fatliquor For Leather

ANIONIC FATLIQUOR
AMARLIX ABW is a anionic fatliquor which can be used alone or in conjunction with other fatliquors it exhibits good light fastness and hence more suitable for white leathers it gives very good softness which is highly preferred for garment and nappa leather.

CHEMICAL COMPOSITION
Anionic
Characteristics
APPEARANCE:Light yellow Colour liquid
pH of 5% Solution:6 - 7
Solubility:Forms stable micro emulsion with water

Stability And Compatibility
Applications
AMARLIX ABW is a versatile fatliquor ideal for nappa, gloving, softies and white leather it can be used alone or in combination with other anionic fatliquors.
For Cow Softy (% on shaved Wt.)
For Sheep Nappa / Goat Upper

Additional Information:

Amarlix Aan Liquid Tanning Retanning Fatliquor Leather Chemical

Amarlix Aan Liquid Tanning Retanning Fatliquor Leather Chemical

Amarlix AAN Liquid is a cationic Fully synthetic multi purpose which can be safely use at various stages of processing viz. pickling, chrome tanning, retanning and fatliquoring. It also has good dispersing power which helps in even distribution of chrome and natural fat and promotes level dyeing.

CHEMICAL COMPOSITION
Fatty acid derivative
Characteristics
Appearance:Reddish Yellow Colour liquid
pH of 5 % SOLUTION:5 - 6
SOLUBILITY:Miscible with water in all proportions
STABILITY AND COMPATIBILITY ::Stable to Acids and Salts but may ppt with Alkali
Compatible with Cationics and Non-ionics but with Anionics
3. It has good light fastness

Application
AMARLIX AAN having good levelling and dispersing action is best used during pickling or chrome tanning or after chrome tannage. 0.5 % AMARLIX - AAN (on pelt weight)

It is mostly used in combination with other cationic fatliquors like AMARLIX AU and AMARLIX GSNN as Pre-fatliquor to get good softness with improved strength as required for clothing leather.
1-2 % AMARLIX AAN (% on Shaved Wt.)
2 % AMARLIX AU
Use 20 - 25 gms/litre of Spray solution

Additional Information:

Amarlix Ag Liquid Used in Leather Dyeing

Amarlix Ag Liquid Used in Leather Dyeing

DYE PENETRATING AGENT
AMARLIX AG LIQUID is a non-ionic solvent used for incresing the solubility of water soluble and solvent soluble dyes to ensure uniform dyeing with deeper penetration of dye in spray or drum dyeing of leather.
Characteristics
Appearance:Colourless liquid
Chemical Composition:Non - ionic
pH in 5% solution:6 - 7

Solubility And CompatibilityApplications
In Drum Dyeing Paste the dye (Anionic, Cationic or Metal Complex dyes) with equal quantity of AMARLIX AG and then add boiling water till the dye is completely dissolved.

The mixture can then be added to the drum and dyeing to be continued as usual.

AMARLIX AG can be used in fatliquoring to give better Penetration and more softness to leather.

Amarlix Ap Liquid Leather Chemical

Amarlix Ap Liquid Leather Chemical

Masking Agent For Chrome Tannage

CHEMICAL COMPOSITION
Characteristics
Appearance:Clear light yellow thin liquid
pH:6 to 7
Concentration:25% {±2%)

Properties
Use

Additional Information:

Amarlix WCL Paste Leather Fatliquor

Amarlix WCL Paste Leather Fatliquor

ANIONIC FATLIQUOR
AMARLIX WCL PASTE due to it very good dispersing properties is used in dyeing or whitening of leather with Titanium Dioxide pigment . It may be included in the Fat liquoring of almost all types of leather as well as being used as dispersing agent and dyeing oil . AMARLIX WCL PASTE due to it high light fastness is suitable for fat liquoring while and pasted coloured leathers.

CHEMICAL COMPOSITION
Derivative of fatty acid, weakly an ion active.
Characteristics
Appearance:Whife Paste
pH Of 10% Solution:5.5 to 6.5
Light Fastness:Very Good
STORAGE:Good stability
Emulsification:The product is emulsified with 5-10 times the DILUBILITY amount of water at 60-70C, this emulsion is then diluted with water.
Stability
Alkalies:Good
Acids:Good
Salts:Good
Compatibility
Anion active substances:Good
Non-Ionic active substances:Good

Applications
AMARLIX WCL PASTE has very good properties and is used in variety of leather processing.

Additional Information:

Aritan RT Liquid Leather Tanning Agent

Aritan RT Liquid Leather Tanning Agent

ARITAN RT is replacement tanning agent for white tannings, when used along with the vegetable tanning it accelerates the tanning process and improves the Feels of the leather with a light level shade. If used alone, it qives a soft white leather with good light fastness preserving the natural grain and maintaining the black and white contrast it is most suitable for drawn grain leather.

Chemical Composition
Anionic Aromatic condensation product
Characteristics
Appearance:Reddish Brown colour liquid
pH of 5 % SOLUTION:7-8
SOLUBILITY:Miscible with water freely


Stability And Compatibility

Application

Aritan Rf Retanning Resin Leather Tanning Chemical

Aritan Rf Retanning Resin Leather Tanning Chemical


Chemical Composition
Acrylic interpolymer
Characteristics
Appearance:amber-coloured, thick liquid
Active substance:25-30%
pH in 10% sol:6
ionic charge:anionic
compatibility:sensitive to pH3
light-fastness:good

Properties
ARITAN RF has the same characteristics as ARITAN RF, But the change on the polymeric tanning agent in the formula provides more gummy and fuller leathers with finer Grain.

ARITAN RF is light-fast and can be used to obtain white leathers.

Additional Information:

Leather Chemical Aricid 30WK Agent

Leather Chemical Aricid 30WK Agent

Characteristics
Appearance:Dark brown liquid
Active matter:20% TCMTB
pH in 10% sol.:approx. 6
ionic charge:non ionic
solubility:Water mixable

Properties
ARICID 30 WK is an anti-mould product containing 30% of 2- thiocyanomethylthiobenzothiazole.

ARICID 30 WK has a wide microbicide action in particular against moulds; it is recommended for long storing and unfavourable climatic conditions.

From the toxicological and biological point of view ARICID 30 WK present low toxicity for the mankind and does not produce inhabiting effects on purification plants' biological beds.

Use

PICKLED PELTS
Indicative amount referred to pelt weight : 0.05%-0.1% diluted in Water 1:3 - 1:10 and added approximately 15 minutes after pickle Acid.

CHROME TANNING
indicative amount for wet blues referred to pelt weight : 0.1% - 0,15% diluted and added after the beginning of chrome tanning.

Additional Information:

Alkali Buffers used in Leather

Alkali Buffers used in Leather

Alkali buffers are extensively demanded in different textile and garment industries for reactive dyeing and considered highly economic substitute for soda ash. These are widely used for obtaining high color yields, best levelness of dyes textiles and best levelness of dyes textiles. These alkali buffers have pH greater than 7 and are generally made from a weak base and one of its salts. Superb quality chemicals are used in processing of these buffers and are checked under various parameters which are set by the industry.

Additional Information:

Amarlix DFA Liquid Leather Dye Fastness

Amarlix DFA Liquid Leather Dye Fastness

DYE FIXING AGENT
AMARLIX DFA LIQUID is highly effective for improving wet and perspiration fastness of suedes and gloving leathers dyed with Acid, Direct dyes
Characteristics
Appearance:Colourless to straw colour liquid
Chemical Composition:Cationic
pH of 5% Solution:5 - 6
Solubility:Miscible with water in all proportions

Stability And Compatibility

Application
As After - treatment
Wet fastness of suede leather dyed with Acid / Direct dyes can be improved by after treating with
Glossy finish on Suede, Gloving Leathers can be enhanced by spraying 10% Solution of AMARLIX DFA
Care should be taken to see that the spraying is avoided with leathers finished with Anionrc finish which may adversely affect the top finish.

Additional Information:

Amarlix SFLN Paste Fatliquor

Amarlix SFLN Paste Fatliquor

AMARLIX SFLN PASTE is a special non-ionic fat liquoring agent for Garment Glows, Upholstery, Softy shoe upper, Suede and nubuk. 6 to 10% AMARLIX SFLN is recommended depending upon type of softness required.

AMARLIX SFLN is Emulsified phosphated Triglycerides and saturated hydrocarbons.
Characteristics
Appearance:Light brown coloured paste with shining
Chemical Composition:Non - ionic
Active matter:65%
Colour:Light brown
pH OF 10% Emulsion:7.5 to 8

Stability
It should be stored below 350 C with protection from direct sunlight

AMARLIX SFLN PASTE gives soft , pluffy and light weight leather. It can be mixed in any proportion with other anionic and non-ionic fat liquors. It gives brilliancy on sued leather.

Additional Information:

Amarlix Sfl Chemical Synthetic Tanning Agent Leather

Amarlix Sfl Chemical Synthetic Tanning Agent Leather

AMARLIX SFL is a semi synthetic fat based on SULPHONATED PETROLIUM FRACTION. It produce a fine emulsion with both hot and cold water which is stable to both hard and chrome. ARILIX SFL is fully synthetic tanning agent with anionic(slightly) character and gives silky feel to leather.

CHEMICAL COMPOSITION
Anionic light fast completely synthetic liquid
Chemical Properties
APPEARANCE:Brownish red viscous liquid
COLOUR:Reddish brown
pH OF 10% SOLUTION:8 to 8.2
STABILITY:Good

Compatibility
Acid:Good
Alkalies:Good
Salts:Medium
CONCENTRATION:App. 60%

Application
It is applied in softy uppers, suede and glowing leather in conjuction with other agents , It is used for white leather and pastel shades .

Additional Information:

Aritan AEF Liquid Leather Retanning Agent

Aritan AEF Liquid Leather Retanning Agent

ARITAN AEF LIQUID is a retanning agent for various types of chrome leather.

CHEMICAL COMPOSITION
Based an polypeptides and aromatic sulphonates.
Characteristics
Appearance:Dark brown viscous liquid
pH|10 % 50 solution):7.5 + 0.5 %
Solid content:45 + 3%
Solubility:Freely miscible in water

Stability And Compatibility

Advantages
Use
ARITAN AEF LIQUID is particularly suitable for the retannage different types of chrome leather like

Additional Information:

Aritan AI Leather Chemical

Aritan AI Leather Chemical

A verstile synthetic replacement syntan, well suited for the retannage of chrome, vegetable and combination tannedleathers.

CHEMICAL COMPOSITION
Phenol-Naphthalene condensation production.
Characteristics
Appearance:ARITAN Al is a spray dried pale cream coloured powder.
Concetration:95 % (min)
Tannin Content:
(Filter Bell Method):70-75%
pH (1:10 solution):3.0-3.5

Properties
Use & Retannage of

Additional Information:

Aritan Mar Resin

Aritan Mar Resin

CHEMICAL COMPOSITION
Aluminium Aromatic resin Syntan
Characteristics
Appearance:A yellowish white fined powder soluble in water
pH (1:10):3.5 - 4.5
Concentration:95% minimum
AI2 O3:approx 10 to 15%
Properties

Application

Additional Information:

Amarlix SH Liquid Anionic Fatliquor

Amarlix SH Liquid Anionic Fatliquor

MULTIPURPOSE PRODUCT
AMARLIX SH LIQUID is a strongly anion-active fatliquor which may be included in the fat liquoring of semi chrome and chrome tanned grain leather and suede. it is used during chrome tanning or in the main fat liquoring operation to achieve very good softening action on semi - chrome leather . it has levelling effect on dyeing with anionic dyes and lightens the shade of

dyeings. it improves the adhesion and glazing properties of the finish when added in the main fat liquoring for chrome and semi-chrome glazed kid leathers.

CHEMICAL COMPOSITION
Anion active sulphonated oil.
Characteristics
Appearance:Pale yellowish oil
pH OF 10% Solution:Appro. 6 to 7
Stability:: Good stability with acid -alkalies and salts.
Salts compatibility:Good compatibility with Anion active and Non-active substance.

Application

Additional Information:
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Leather Chemical ?

    country-ico

    We will contact you soon !

    Mitesh Shah

    (C.E.O)

    Arihant Dyechem

    Goregaon, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us