ARITAN DS LIQUID is a bleaching syntan having good cleaning and bleaching action esp. for sole and vegetable tanned leathers to get on even. Clean bright and light coloured surface.
CHEMICAL COMPOSITION Anionic Naphthalene sulphonic acid condensate
Brown colour liquid
pH of 5 % Solution
Freely dilutable with water
Stability And Compatibility
Stable in dil-acids,. Alkalis and Salts
Good shelf life
Compatible with non ionics, Anionies and electrolytes.
Applications ARITAN DS liquid is generaly used at last stage of processing. The pretanned leather if loaded in a drum and 2-3% ARITAN' DS liquid is added and run for 30-40 mins, ARITAN DS can be added during chrome tanning for getting white or paste shade. Additional Information:
Properties ARITAN RE is a special retanning agent for chrome leathers. Its special retanning action allows to achieve full leathers, without Modifying their grain Fineness.
It is viscous but easily pourable and dilutable by adding warm Water. Th product is sensitive to acids and can percipiate with pH Valueslower than 3; it's only partially mixable with cationic Products ( for example: mineral tanning agents}. ARITAN RE Can be used with synthetic and vegetable tanning agent Fatliquors, sulphited products, anionic dyestuffs and other anion- Active products in the usual concentration, provided that pH does not decrease under the above said limit.
In retanning, ARITAN RE provides fullness without affecting Grain fineness and firmness, moreover the typical aspect of chrome Leather remain unchanged, though some synthetic vegetable Retanning agents are still necessary.
ARITAN RE is light-fast and offers even and slightly lighter dyes. In case of light-colored leathers, together with white tanning Agents, you will obtain an even higher white degree. Additional Information:
An auxiliary syntan for dye levelling, neutralization, retanning and for the dispersion of vegetable tannis.
Chemical Composition Auxiliary dye levelling syntan based on naphthalene sulphonic acid condensate
Light, yellowish brown powder
95 % (min.J
Being anionic in nature, it reduces the rate of uptake of anionic dyes leading to outstanding levelness and helps to penetrate anionic product such as syntans, fatliquors and vegetable tans.
With its dispersinq action, it promotes an even distribution of tanning agents and in combination with syntans and or vegetable tannis, it is helpful retannage.
It neutralises the mineral tanned leathers due to its anionic character and neutral pH
Acting as a mordant for basic dyes.
Application Levelling Agent for uniform dyeing : 0.5 to 2 % Neutralization : 1.5 to 2.5 % Retanning: After neutralization 2-3% (on shaved weight) along with other syntans and vegetable tannis for retanning of leathers. Dispersing agent for vegetable tannis : - 2 to 3 % Additional Information:
CHEMICAL COMPOSITION A Synthetic tanning agent with neutralizing & buffering properties.
Blend of salt of aromatic sulphonic acids with buffering agents
Redish brown coloured clear liquid
pH (as such)
7.5 ± 0.5
4 ± 1%
Soluble in water
Properties ARITAN NG offers buffer system with a very uniform neutralizing effect even at fairly low pH value , a feature that promotes grain tightness. The risk of excessive neutralization is eliminated even with the addition of strongly alkaline neutralizing agent as the system is well buffered and pH does not increase drastically.
ARITAN NG forms complex salts with chrome tanning compounds. These complex salts than from chromium - protein complexes, which occupy a large space & thus produce leather of improved fullness. The affinity of the chromium complex for the skin is so pronounced that the chromium salt solution almost completely exhausted.
ARITAN NG is lightfast. ARITAN NG gives level dyeing without weakening the dye intensity. ARITAN NG improves dye penetration when used in the dye bath. ARITAN NG facilitates economical one-bath compact processing Special effects can be obtained by incorporating large quantities of ARITAN NG, e.g. in suede leather, for exceptional fullness & a very dense nap. Additional Information:
Properties ARICID D10 acts in a pH range between 6 and 10 and is Compatible with all the auxiliaries present in soaking and liming. ARICID D10 is an excellent odourless preserving agent with Strong bactericide action that, spreading on leather evenly, assures Long preservation on green or on any kind of leather in soaking.
Use Green leathers : - use 0,3% ARICID D10 calculated on the fresh weight for 3 days preservation.
The maximum preservation is one week, increasing ARICID DIO by 0.1% every additional day. Soaking
Use 0.03 0.10% ARICID D10 for short soaking
Use 0.06 0.15% ARICID D10 for long soaking
Vegetable Tanning Indicative amount referred to pelt weight : 0.1% - 0.2% diluted 1:2- 1:5 to be added slowly with the vegetable tanning agent.
Retaining Indicative amount calculated on shaved weight: 0,05% - 0.1% blended with the fatliquor.
ARICID 30 WK dosing also depends on climatic conditions, Wet blue storing length and on the presence of substances that Increase leather tendency to form moulds (ammonium salts, Surfactants, fatliquors, organic masking agents, etc).
The amounts indicated above are indcative and can change from case to case.
Some practical tests will be useful to establish the best does for Every single case. Additional Information:
ARITAN AS is a synthentic replacement tanning agent for the retannage of chrome leather and vegetable tanned leathers.
Chemical Composition Phenol condensation product.
Pale cream coloured powder
97 + 1 %
pH in (10% solution)
Properties ARITAN AS is a spray dried powder. It has a strong bleaching effect when use on its own on chrome leathers. It has slightly buffering action with a medium filling effect . It also prevents sludge formation in tan liquors and helps produce a brighter, lighter and cleaner leather.
Application ARITAN AS is suitable for a wide range of applications in the production of
Properties ARITAN MXT is a tanning agent with great affinity towards Natural proteins. Used in pre-tanning on pickled leathers, it allows Wet-white preparation and a noticeable save of tanning and Retanning agents in the Traditional tanning processes.
Combined with vegetable and synthetic tanning agents, it provides a softer, fuller and clearly lighter leather compared to Leathers manufactured without ARITAN MXT.
It can be used as pre-tanning agent as substitute for glutaraldehyde As well as in various stages of leather production with different quantities depending on the requested article. The mam advantages deriving from its use are :
Better and excellent chrome float exhaustion.
Fuller and softer leather
Easy use in every tanning phase without negative interactions.
Pure white hair if used on hairship.
Combined with vegetable extracts, it noticeably improves leather shrinking degree, even without chorme.
Degreasing action on pickle leathers during pre-tanning Moreover, ARITAN MXT is successfully used in wet-blue or Pickled neutralization phase in amounts of 1,5 2%, where thanks to its basic pH it exerts a neutralizing and very good reforming action.
ARITAN GSI LIQUID is a tanning agent based on synthetic resin based on carbamide formaldehyde precondensate. ARITAN GSI LIQUID is suitable for the retannge of chrome upper, clothing leathers and upholstery. It has excelling and colour yield produces a good regular, nap on the suede.
Colourless , Slightly cloudy liquid
Precondensate of carbamide formaldehyde
6.5 to 7.5
Good stability to acids ,alkali and salts but not stable below pH 3.5
Good with anionic , cationic and non-ionic products.Non compatible with vegetable tannins .
5 to 6 months if stored carefully at 30 -35C
Properties ARITAN GSI LIQUID is noted for its ease of application and uesd at many stages in leather processing including pickling retaining, chorme tanning, dyeing.
Retanning : used of 3-5% may be applied alone in combination with suitable synthetic tanning for levelling out irregularities in the structure of leather & controlling the rataining process.
Pickling : (3-5% on weight) is added to pickle bath at pH of about 5 and treatment time of 30 minutes produces leather which are substantially more compact in nature.
Chorme tanning : (1.5 to 2% on weight) in chorme tanning bath improves the plumpness and grain tightness of cattle hides for shoe uppers.
ARITAN GSI LIQUID can be used in retaining of nappa leather sheep, goat, suede leather and for full grain or corrected grain hide. Additional Information:
These are extracts from different types of trees, bark and fallen fruit contain tanning agents used for vegetable tanning leather. In particular, the Mimosa and Quebracho trees along with the fallen fruit of the Tara tree.One way of imitating the vegetable tanning method is with synthetic tanning, also called chrome-free. Additional Information:
Production Capacity: 500
Delivery Time: Within 10 Working Days
Packaging Details: 25 kgs laminated paper bag or HDPE plastic bag
ARITAN LSI LIQUID is a resin retaining agent and gives good grain tightening. It is used for the retainage of a wide variety of chrome leather and particularly valuable for softy upper leathers with tight grain and for exceptionally soft Nappa leathers and suede.
pH of 10% Solution: Compatability: Storage Stability:
Compatability:n-active, Non - ionic and Cation - active substance
Properties The best result is obtained in the pH range of 3.5 to 4.5 i.e. slightly acidic pH. at very low pH below pH 3.5, it causes hardening of leather. At optimum pH it gives good grain tightening and structure levelling properties with a slight Filling action on leather. it produces a fine, tight and elastic grain leather and white or pastel coloured leather.
The best result are obtained in the acidic pH (3.5 to 4.5) and hence ARITAN LSI LIQUID can be applied before or during neutralization process.
ARITAN AS is a synthetic replacement tanning agent for the retainage of chrome leather and vegetable tanned leathers.
Chemical Composition Phenol condensation product.
Appearance: coloured powder
97 + 1 %
pH in (10% solution)
Properties ARITAN AS is a spray dried powder. It has a strong bleaching effect when use on its own on chrome leathers. It has slightly buffering action with a medium filling effect . It also prevents sludge formation in tan and helps produce a brighter, lighter and cleaner leather.
Application ARITAN AS is suitable for a wide range of applications in the production of
A light fast neutralizing syntan with pronounced buffering effect and complex forming action.
Chemical Composition Auxiliary neutralizing syntan based on naphthalene sulphonic acid condensate.
Light cream coloured powder
(1:10) : 7.0
Being anionic and having neutal pH, it neutralizes the cationic chrome and mineral tanned leathers.
With buffering and complex forming action, it neutralizes uniformly the surface and the cross section of leather leading to a very great levelling action and imporved penetration of anionic products including anionic dyes.
No tanning action on the grain of leather leading to no coarseing of the grain.
Helps to disperse the tannis, distributing them more evenly in the leather.
Used either alone (1-3% on shaved weight) or in combination with common commercial neutralizing agents like sodium bicarbonate, sodium formate etc.
Highly suitable for initiating the retannage when used alone or in combination with other retanning agents.
Used after a chrome or zirconium tannage, for example on box calf and napps.
Provides level dyeing with only minimal shade weakening effect by preventing the spontaneous reaction of anionic dyes with cationic charged leather i.e chrome leather,
CHEMICAL COMPOSITION Acrylic polymer with high molecular weight
APPEARANCE:red viscous liquid
pH in 10 % Sol.
with chromium salts, zirconium, vegetable and synthetic tannins
Properties ARITAN A540 can be used in all the retanning phases obtaining Very good filling with grain firmness. The best results will be Obtained by using ARITAN A540 after chrome tanning and before Neutralization. ARITAN A540 is used to obtain real Italian-style napped, combined With synthetic and vegetable tannins, obtaining various forms of Softness ond fullness.
The use of ARITAN A 540 allows to obtain full grain and corrected Grain finishing.
Use 2-6% on shaved weight, depending on leather type and desired effect. Additional Information:
By making use of quality chemicals and advance technology, our company has put forward its client centric approach in providing organic pigments. These organic pigments are available in different colors to meet the requirements of the customers more closely and to satisfy them with the quality of our product. These are basically molecules of carbon atoms which are joined with different atoms of hydrogen, nitrogen or oxygen.
Our company has gained reputation as a leading provider of pigment emulsion which processed under the strict supervision of quality experts. This pigment emulsion is extensively demanded in different dye processing applications in garment, textile, paint, detergent, paper and other allied industries. Furthermore, these are checked under various set quality parameters to fulfil the requirements of the customers more precisely and closely.
ARITAN AB3 / AB4 is a synthetic tanning agent for bleaching vegetable tanned or retanned leather to a pale colour.
CHEMICAL COMPOSITION Napthalene sulphonic acid condensation product
Pale yellowish powder readily soluble.
pH [10% solution)
Particularly suitable for the bleaching of El tanned leather.
ARITAN AB3 produces a neutral pale leather colour while ARITAN AB4 gives a pronounced yellowish tinge
Removes the iron stains on vegetable and retanned leathers, stable to iron and no discolouration accurs due to iron.
Imparts an even, clean and bright look without effecting the resistance to cracking of the grain.
ARITAN AB3 is mostly preferred for bleaching EI leather while ARITAN AB4 is preferred for bleaching heavy leathers like factory sole leather, industrial leather etc.
Drum Bleaching : light & medium weight leathers are drummed with 3.5% of ARITAN AB3 or AB4 in 150% of float at 30oC until the desired bleach effect is attained followed by rising for five minute in running water.
Dip Bleaching : This is carried out in plastic tubs containing solution of 70-100 gm of ARITAN AB3 or AB4 per litre of water. The leathers to be bleached are imersed for a short period in the solution given a short rinse.
Formic acid is used in leather industry, where it is used in the tanning and treatment of leather to prevent mould formation. Formic acid is also used in the production of formates (used in oilfield chemicals, de-icers and coolants), artificial sweeteners, pharmaceuticals, plant protection agents and UV absorbers, as well as in textile dyeing and finishing. Additional Information:
Basic Chromium Sulphate can be used in tanning and retanning of any kind of leather including hides or skins. Basic Chrome Sulfate powde is a Tanning Agent shows excellent penetration capabilities and guarantees a high-quality wet blue. It also provides uniform chromium oxide distribution on the cross section and the grain of the leather. Additional Information:
Our company has gained immense accolades in this domain for providing excellent quality pigments for textile and garment industries by using supreme quality chemicals. Pigment is basically a material which has a special quality of changing colors by absorbing and reflecting light of particular wavelength hence gives different colors to the material on which it is used. Clients can avail it in different colors as per their precise requirements and to cater their business needs closely we provide it in bulk.
Owing to the vast experience in this domain and expert knowledge of our skilled professionals, our company has proudly claimed itself as a renowned provider of pigment powders. These pigment powders are used on plaster, concrete, plastic resins, etc. These are available in different colors and textures to meet the requirements of the customers. Furthermore, these are quality tested at each and every stage of the manufacturing process.
AMARLIX WA is silicone based water soluble fat used as a water repellancy for all types of leather.
CHEMICAL COMPOSITION Silicone polymer solution with specially derived oils.
Thick transulent but pourable white paste.
Stable to Acid, Salts and hard water.
AMARLIX WA is thick transculent white paste easily water soluble can be dilute with toulene or other hydrocarbons to increase evaporation rate AMARLIX WA is easily absorbed by leather and does not leave any gray cost on dark coloured leathers. It does not affect the original appearance sand finish of leather AMARLIX WA makes the leather water repellent reduces the water absorption of leather in use, without affecting the water vapour permeability.
Application AMARLIX WA can be applied to leathers addition to main fat about 2 to 5% as per requirement of water repellants. It higher doses increase water repellency AMARLIX WA makes leather softer than the original material and retain the softner and mechanical properties much longer AMARLIX WA treated shoes and leather goods after use in wet condition dry out much faster and do not stiffen. AMARLIX WA also works as dispersing Agent for fat activating main fat to distribute uniformly giving better result. Additional Information:
AMARLIX SFLN PASTE is a special non-ionic fat liquoring agent for Garment Glows, Upholstery, Softy shoe upper, Suede and nubuk. 6 to 10% AMARLIX SFLN is recommended depending upon type of softness required.
AMARLIX SFLN is Emulsified phosphated Triglycerides and saturated hydrocarbons.
Light brown coloured paste with shining
Non - ionic
pH OF 10% Emulsion
7.5 to 8
Stability It should be stored below 350 C with protection from direct sunlight
AMARLIX SFLN PASTE gives soft , pluffy and light weight leather. It can be mixed in any proportion with other anionic and non-ionic fat . It gives brilliancy on sued leather. Additional Information:
Method of diluting: Stir water of 60-70 0C in to the product
SYNTHETIC FATLIQUOR ARIFAT-AX-902 is a white to yellowwish paste based on sulphon synthetic oils.
1 year (at room temperature)
Not sensitive to frost. In case of freezing warm the product.
Stability in mineral tanning floats
Method of diluting
Stir water of 60-70 0C in to the product
Application recommended dossage
sheep garment nappa
white upper leather
Prefatliquor in the neutralization
Limb nappa for gloves prefatliquor
4 to 6%
3 to 4%
BENEFITS By selecting and edjusting the ratio of the individual components of a fatiquoring mixure every type of softness and surface effect can be achieved, Owing to the high affinity to the learner fibre ARIFAT-AX-902 is suitable for leathers with a low extractable fat content, Because of the very good lightfasrness and heat resistance it is also suitable for white leathers especially in combination with ARIFAT-AX-902
In sole application a leather with a relatively dry surface feel will be obtained. Additional Information:
ARIFAT S-40 is actually synthetic light fast fat liquoring agent for clothing and gloving leather easily finishable and very soft leather obtained when treated with it . They remain fast to dry cleaning and washing.
CHEMICAL COMPOSITION Aliphatic hydrocarbons and alcohols sulphonated by special method.
Light coloured pasty
Light brown liquid
Ph Value Of 10% Emulsion
7.5 to 8.5
Solubility Emulsifiable with water at room temperature in every concentration.
Stability Stable to all salts at all pH at usual tannery concentration.
Compatibility Compatible with Dyes & Synthetic Vegetable and semi synthetic fat liquors.
Emulsifying Capacity Upto 05% of its own weight for Water insoluble oils.
Storage Stability Atleast 12 months
Application Stir slowly 3-4 parts water of approxmately 50oC into 1 part of ARIFAT S-40. Additional Information:
Amarfat sp is a versatile lubricant for fatliquoring operations having application properties similar to that of oil. Chemical composition anionic fatliquor based on sulfated high molecular weight fatty ester.
Paints pigments are the chemical compounds which are used in processing of paints. These are available in different colors and textures according to the requirements of the clients. These paints pigments are the polymeric substances and have corrosion inhibition properties. These are soft to skin as supreme quality chemicals are used in processing of them. In addition to this, these found high solubility in water.
Our company is backed by the rich industrial experience and indulged itself in this domain of providing plastic pigments to the customers since its inception. These Plastic Pigments are extensively used in different plastic manufacturing industries for giving different colors. These are chemically processed under the supervision of our talented professionals. Moreover, these are approved for quality after going through various set FDA standards.
We are into providing superb quality range of pigment dispersions which are used in place of dyes in the applications where thermal stability, light stability and opacity are required. These are generally used for non-woven textiles, latex products, construction lumber coatings and architectural coatings and are available in different shades and colors.