Aripol ML Leather Emulsifying Chemical
Approx. Rs 250 / Kg
- Minimum Order Quantity: 25 Kg
- Brand: ARIPOL
- Color: Red
- Grade Standard: Bio-Tech Grade
- Physical State: Liquid
- Usage: Industrial
- Packaging Type: Plastic bottle
- Ph value: 6
- Ecological Degreasing Auxiliary
Chemical Composition Derived from ethoxylate alcohol
Characteristics | Appearance | : | achromic liquid | Active substance | : | about 30% | pH in 10% sol | : | 5,5-6 | ionic charge | : | nonionic | compatibility | : | anionic and nonionic | biodegradability | : | sup- To 90% | COD | : | mg/g 600 |
|
|
|
FREE OF ETHOXY NONYL PHENOLProperties ARIPOL ML carries out a decreasing, emulsifying and deterging Action on the natural fats of the skins and it can be used on all Articles. Then, as opposed to the decreases based on ethoxy nonyl phenol, ARIPOL ML is much more biodegradable and has lower COD Values
Use It is used from 0,4% to 0,8% according to the articles.
Additional Information:- Production Capacity: 500-1000
- Delivery Time: 5 TO 10 WORKING DAYS
- Packaging Details: AS PER STANDARD PACKAGING
Amarlix Nei Liquid Leather Chemicals
Approx. Rs 150 / Kg
- Usage/Application: Industrial
- Brand: Amarlix
- Color: Yellowish
- Grade Standard: Technical Grade
- Physical State: Liquid
- Usage: Laboratory, Industrial
- Packaging Type: Plastic bottle
- PH value: 6-7
NON IONIC DEGREASERAMARLIX NEI LIQUID is a non-ionic degreasing agent highly effective in removal of natural grease in live stock. It can be very safely used at various stages of leather processing viz, bating, tanning and retanning operations.
Characteristics | Appearance | : | Colourless liquid | Chemical Composition | : | Non-ionic | Ph of 5% Solution | : | 6-7 | Solubility all | : | Miscible with water in properties |
|
|
|
Stability And Compatibility- Stable to Acids, Alkalis and Salts
- Good shelf life.
- Compatible with Non-ionics, Anionics an Cationics.
ApplicationsAMARLIX NEI Liquid can be used at various stages of leather processing
- In Bating Addition of 0.2% - 0.5% AMARLIX NEI to the batting helps in easy removal of Grease.
- In Chrome Tanning Addition of 0.3 - 0.5 % AMARLIX NEI in the chrome tanning bath gives a more cleaner leather.
Additional Information:- Production Capacity: 500-1000
- Delivery Time: 5 TO 10 WORKING DAYS
- Packaging Details: AS PER STANDARD PACKAGING
Amarlix EI Liquid
Approx. Rs 250 / Kg
- Color: Yellowish
- Grade Standard: Reagent Grade
- Physical State: Liquid
- Usage: Industrial
- Appearance: Pale, opalescent liquid
- Application: Textile industry
SOLVENT BASE DEGREASING AGENTAMARLIX El is an excellent degreasing agent used as quality improver in finished leathers. It is generally accepted that the presence of excess natural fat in hides and skins are caused on unsatisfactory dyeings and difficulties in finishing due to the formation of metallic soaps during chrome tanning, AMARSOL El can also be used in the batting process and can improve natural fat dispersion in skins before pickling and tanning. The leather carries fatty matter in the form of chrome soaps and the use of AMARSOL El will result in level dyeing and improved nap.
Characteristics | Appearance | : | Pale, opalescent liquid | Ionic Character | : | Solvent containing small amount of anionic emulsifier | Stability | : | Acid - Good Alkalies - Good | (Unstable in high concentration of neutral salts) | Storage | : | Good |
|
|
|
ApplicationE.I. Sheep and goat skins for semi-chrome suede and grain garment and gloving.
Stripping Bath300-400% water at 43C
4% AMARSOL El Percentage calculated on 1-3% Sodium Bicarbonate shaved weight.
Arilix A Liquid
Approx. Rs 261 / Kg
- Color: Brown colour liquid
- Grade Standard: Reagent Grade
- Physical State: Liquid
- Packaging Type: Bottle
- Usage: Industrial
- PH value: 7
ARILIX is a useful leather processing auxiliary products for the production of chrome uppers, Gloving leathers, leathers clothing, ARILIX A promotes the even distribution of chromes and fats through the cross section if the leather. It disperes the natural fats and enchances the softness of the leather. Use of ARLIX A helps to promote level dying and avoids drown grain when used in semi chrome tanned leather.
CHEMICAL COMPOSITIONDerivation of fatty acid, amphoteric in nature.
Characteristics | Appearance | : | Brown colour liquid | Properties | : |
| pH of 10% Solution | : | About 7 {approximately} | Compatibility | : | Compatible with Anion | active, | : | Non Ionic and cation | active | : | substance | Stability | : | Very good stability in | Acids | : | Alkalies and Salts | Storage | : | Good stability |
|
|
|
Application- Picking :
ARILIX A is suitable in pickle or in chrome tanning of leather. It promotes an even distribution of the chrome and dispersion of the Chrome and fine dispersion of natural fats. The picking process can be accelerated by adding 0.5 to 1.5% ARILIX A [on pelt weight) - Fatliquoring Process : 0.1 to 1% ARILIX A {on shaves weight) is added together with the retain agent or in preliminary Fat liquoring process. It's use in main fatliquoring process, improves penatration and uniform distribution of the fat 1 -5% ARILIX A (on weight of fat ).
- Leveling of Dyes : 0.3 to 0.5%
Amarlix AU Paste Fatliquor for Chrome Tanned Leather
Approx. Rs 126 / Kg
- Packaging Type: Bottle
- Usage: Dispersing agent
- Brand: Amarlix
- Flavor: Citronella
- Application: Textile industry
- Form: Liquid
MULTI PURPOSE FAT LiquidAmarlix AU Paste is used in the preliminary fat-liquoring of chrome tanned leather usually in combination with AMARLIX GSNN PASTE. It acts as a dispersing agent for natural fats and chrome tan Uniform distribution of chrome in upper and central layer of leather means level shades in dyeing. AMARLIX AU PASTE promotes excellent and even fat liquoring through the cross section hereby giving leather a relatively dry handle and leaves suede leathers good buffing properties and regular nap. Its use in preliminary fat liquors prevents thin and large -sized leather from entanglement and increase the tensile strength and stitch resistance of leather.
CHEMICAL COMPOSITIONWeakly cation active emulsion of natural oil.
Characteristics | Appearance | : | Cream coloured, pourable paste. | pH For 10% SOLUTION | : | Approx. 5 |
|
|
|
StorageGood at 40C a more consistent Surface layer may be formed which can again be dispersed homogenously by stirring
EmulsificationEmulsion can be formed by adding five times the amount of water at 50C & be further dilutedas per requirements
Compatibility- Very Good with Non-ionic and Cation active.
- Compatible with weakly anion active substance.
LIGHT FASTNESS : Good
STABILITY Acid | : | Good |
Alkalies | : | Not Stable |
Salts | : | Fairly Good |
Application- For Suede Leather (as main fat-)
It gives good softness and good level shades when used after drum-dyeing the leather. - For Pre-fatliquoring
It used before neutralising , AMARLIX AU PASTE gives deeper penetration. Normally 2-4 % AMARLIX AU PASTE is used for treatment. - As surface fat (Final fatliquorig) for grain leather. Addition of AMARLIX AU PASTE to the nearly exhausted fat-liquoring bath, gives following advantages.
- Better exhaustion of .
- Better Fixation of the anionic fat in the leather.
- It reduces the absorbancy of the grain . - In chrome tanning : Use of AMARUX AU PASTE avoids chafe Marks and minimises inter twining of sheep and goat skins.
ConcentrationAppro . 0.2% on weight of pelt . 5) For special effects in fashion articles : AMARLIX AU PASTE (1-2% if used in exhausted anionic fat bath gives greasy handle leather.
Additional Information:- Production Capacity: 500-1000
- Delivery Time: Within 5 to 10 Working Days
- Packaging Details: As per standard packaging
ARIOL M9X Concentrated Degreasing Agent
Approx. Rs 250 / Kg
- Physical State: Liquid
- Usage: Industrial, Laboratory
- Grade Standard: Reagent Grade
- Appearance: Colourless liquid
- Active substance: About 100%
- pH in 10% sol: 6
- compatibility: Anionic and nonionic
- biodegradability: sup. To 90%
Concentrated Degreasing AgentCHEMICAL COMPOSITION - Modified ethoxy alky phenol
Characteristics |
Appearance | : | colourless liquid | Active substance | : | about 100% | pH in 10% sol | : | 5.5-6 | compatibility | : | anionic and nonionic | biodegradability | : | sup. To 90% |
|
PropertiesARIOL M9X has the same emulsifying, dispersing, wetting Back and degreasing properties and characteristics.
UseWe recommend from 0.5 to 1.5% depending on the type of Leather to be decreased.
Ariol Abi Liq Chemical
Approx. Rs 167 / Kg
- Grade Standard: Reagent Grade
- Physical State: Liquid
- Usage: Industrial
- Appearance: Colourless to pale yellow, clear viscous liquid
- PH value: 6.5 - 7.5
- Application: Textile industry
Characteristics | Appearance | : | Colourless to pale yellow, clear viscous liquid | Chemical character | : | Crypto-anionic based on modified poly-Glycol ether | pH in 10% sol | : | 7 + 0.5 | solid content | : | 33 + 1 % | Dilutability | : | Readily dilutable with water Stability to solutions of | - Acid | : | Good in weak acid | - Salt | : | Good | - Hard Water | : | Good |
|
|
|
Technical Information ARIOL ABI Liquid is an effective degreasing agent for hides and skins And can be used in pelt, E.I. tanned and wet blue stages.
ARIOL ABI is specially suitable for degreasing sheep skins which is capable of dispersing chrome soaps and so can be used to degrease Wet blue skins to achieve level dyeing for aniline leathers It also Helps to minimize back bone patches in suede dyeings.
Alkyl Polyglucoside
Approx. Rs 150 / Kg
- Usage/Application: Industrial
- Packaging Size: 25 L
- Grade Standard: Reagent Grade
- Packaging Type: Drum
- Physical State: Liquid
Alkyl polyglycosides (APGs) are a class of non-ionic surfactants widely used in a variety of cosmetic, household, and industrial applications. Biodegradable and plant-derived from sugars, these surfactants are usually glucose derivatives, and fatty alcohols.
Aripol M300 Degreasing Solvent
Approx. Rs 230 / Kg
- Minimum Order Quantity: 25 Kg
- Usage/Application: Industrial
- Grade Standard: Technical Grade
- Physical State: Liquid
- Usage: Industrial
- PH value: 6
- Appearance: Achromic liquid
- Compatibility: Anionic and nonionic
- Super conc. Degreasing product on solvent base
Chemical CompositionCombination of ethoxylate alcohol with solvent
Characteristics | Appearance | : | achromic liquid | Active substance | : | about 30% | pH in 10% sol | : | 5,5-6 | ionic charge | : | nonionic | compatibility | : | anionic and nonionic |
|
|
|
PropertiesARIPOL M300 is free of ethoxylate Nonyl phenol but is has in its place special efhoxylate alcohol in Order to get the maximum between fhe decreasing action of the Solvent and the deterging action of the surfactant.
Therefore an exceptional cleaning of the grain, with the use of ARIPOL M300 is obtained.
UseYou can use it only between 1% and 2% or in mixture with ihe Surfactant between 0,5% and 1%
Additional Information:- Production Capacity: 500-1000
- Delivery Time: 5 to 10 Working Days
- Packaging Details: As per standard packing
Dishwashing Liquid
Approx. Rs 100 / Kg
- Usage/Application: Dish Washing
- Packaging Size: 25 L
- Fragrance: Sandal
- Packaging Type: Plastic Bottle
- Form: Liquid
It is usually a highly-foaming mixture of surfactants with low skin irritation, and is primarily used for hand washing of glasses, plates, cutlery, and cooking utensils in a sink or bowl.
Ariol M Chemical
Approx. Rs 210 / Kg
- Grade Standard: Reagent Grade
- Physical State: Liquid
- Usage: Industrial
- PH value: 6 - 6.5
- Appearance: Yellow viscous liquid
- Active substance: About 25%
- Degreasing Wetting Dispersing Product
Chemical CompositionAnionic and nonionic substance
Characteristics | compatibility: Appearance | : | yellow viscous liquid | Active substance | : | about 25% | pH in 10% sol | : | 6-6.5 | ionic charge | : | nonionic | | compatibility:nionic | biodegradability | : | sup. To 90% |
|
|
|
PropertiesARIOL M is particularly suitable in the decreasing operations In the bating phase and after the chrome tannage. Infect it is used As decreasing agent in the initial phase of re-tanning and as Dispersing in the following dyeing phase.
ARIOL M is a surfactant of universal use, because it has good Wetting, dispersing and emulsifying properties.
UseIt is used From 0.7% to 1.2% in bating.